This article summarizes the required and optional communication channels for a Neo4j enterprise cluster and provides some sample rules. For the firewall rules I’m using Ubuntu’s ufw package.
As a sample setup we assume the following servers. All of them have 2 network interfaces, eth0 is for communication with outside world, eth1 is for cluster communication.
| name | eth0 ip address | eth1 ip address |
|---|---|---|
| server1 | 172.16.0.1 | 192.168.1.1 |
| server2 | 172.16.0.2 | 192.168.1.2 |
| server3 | 172.16.0.3 | 192.168.1.3 |
access to REST interfaces
By default Neo4j listens on port 7474 for http and on 7473 for https style requests to the rest api. To allow for remote access you need to set in neo4j-server.properties:
org.neo4j.server.webserver.address=172.16.0.1 // or 0.0.0.0 for all interfaces
Inbound access needs to be granted using
ufw allow in on eth0 proto tcp from any to any port 7474
When using SSL the rule needs to hit port 7473 instead.
cluster communication
A Neo4j cluster uses two different communication channels: one for cluster management (joining/leaving the cluster, master elections, etc.) and one for transaction propagation. By default ports 5001 and 6001 are used. On all cluster members we need to allow inbound and outbound traffic for these to the other cluster members:
# cluster management: inbound and outbound
ufw allow in on eth1 proto tcp from 192.168.1.0/24 to any port 5001
ufw allow out on eth1 proto tcp to 192.168.1.0/24 port 5001
# transaction propagation: inbound and outbound
ufw allow in on eth1 proto tcp from 192.168.1.0/24 to any port 6001
ufw allow out on eth1 proto tcp to 192.168.1.0/24 port 6001
online backup
Neo4j enterprise supports online backup – the default port for this 6362. To enable remote backup you need to set in neo4j.properties:
online_backup_server=192.168.1.1:6362 // or 0.0.0.0:6362 for listening also on eth0
The corresponding ufw command is:
ufw allow out on eth1 proto tcp to 192.168.1.0/24 port 6362
ufw allow in on eth1 proto tcp from 192.168.1.0/24 to any port 6362
remote shell
This is pretty tricky. Under the hoods neo4j remote shell uses Java RMI. When a new connection is established the client communicates with server:1337. During this control session a secondary port is negotiated – unfortunately a random port is used. So the client opens a second connection to the server with the negotiated port – therefore we have to open up basically all ports for the ip addresses acting as shell clients:
ufw allow in on eth1 proto tcp from
ufw allow out on eth1 proto tcp to
There might be a more sophisticated approach by implementing a custom RMISocketFactory and register it with the JVM as described in the JVM docs. I have not yet tried this, so if you have explored that path yourself I’d appreciate to hear your solution to this.